Kyosho 36112 Compact 2.0mm Hex Driver for Truck Series  [KY-36112]

Compact driver with a 2.0mm hex tip for truck-series RC

A basic 2.0mm hex driver designed for 1/10 truck-series RC models. The narrow 2.0mm tip fits the small hex screws used on suspension components, servo mounts and accessory brackets on scaled trucks. It serves as a practical hand tool for building, maintenance and fine tuning where a small, accurate hex tip is needed.

On-vehicle uses

• Use to tighten and loosen 2.0mm hex screws in chassis parts and body mounts.
• Perform pre-run checks by confirming tightness on steering rods, shock fittings and accessory mounts.
• Compact dimensions make it convenient to carry for pit-side fixes and last minute setup changes.

Care tips to protect the tip

• Place the tip square into the screw head to limit cam-out and avoid deforming the hex recess.
• Remove dirt and filings from the tip after running to reduce accelerated wear.
• Keep the driver in a foam slot or small case to prevent tip damage and to organise spare bits.