Kyosho BRG407 5x10x4mm Shielded Bearing Upgrade  [KY-BRG407]

Kyosho BRG407 - Shield Bearing(5x10x4) 4Pcs
Price:
AUD$22.06
Brand:
Kyosho
Model:
KY-BRG407
GTIN:
4548565493432
Condition:
Brand New
Quantity Discount
Unit Price You Save
2 $17.90 each $8.32 or 19%
3+ $17.01 each $15.15 or 23%
Write a review

Consistency and control with Kyosho BRG407 bearings

Kyosho BRG407 shielded bearings, sized 5x10x4mm, are designed to deliver reliable rotation and reduce power loss through the drivetrain. They are suited to hobbyists wanting steadier performance during both practice and competitive runs.

Advantages of shielded construction

The shielded design on the Kyosho BRG407 deflects dirt and helps retain lubrication, which lowers internal friction and delays wear. Replacing worn bearings with this four pack can restore smoothness and responsiveness to moving parts.

Simple steps for best results

Clean the bearing bores and shafts before installing Kyosho BRG407 bearings and avoid forcing them at an angle. A light bearing lubricant applied sparingly will cut friction further and prolong service intervals.
Remark :
Due to limited stock availability, please notice that some Kyosho items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Can I retrofit these into older kits?

If the original parts call for 5x10x4mm bearings you can usually retrofit these without modification. Check clearances and seating depth before final assembly.

Should I remove the shields to lubricate?

You generally do not need to remove shields; a drop of light oil applied to the outside works for most maintenance. Removing shields risks contaminating the races during reassembly.

How do I know when bearings need replacing?

Replace bearings if you notice roughness, excessive play, noise, or heat under load. Fresh Kyosho BRG407 bearings will restore smooth rotation and reduce strain on adjacent gears.

Are these bearings compatible with electric and nitro vehicles?

Yes, these bearings suit both electric and nitro applications as long as the 5x10x4mm size matches the chassis requirements.

Copyright © 2008-2025 rcjaz.com.au All rights reserved