Kyosho FAB618 1/10 2018 Porsche 911 GT3 RS Body for FAZER Mk2 FZ02  [KY-FAB618]

Kyosho FAB618 - 2018 PORSCHE 911 GT3 RS Non-Decoration Body Set
Price:
AUD$0.00
Brand:
Kyosho
Model:
KY-FAB618
GTIN:
4548565528714
Please kindly input your name and email address, we will inform you once we have the restocking.
Write a review

2018 Porsche 911 GT3 RS Polycarbonate Body

The Kyosho FAB618 non-decoration body set presents an unpainted polycarbonate shell inspired by the 2018 PORSCHE 911 GT3 RS for FAZER Mk2 FZ02 on-road chassis. It arrives as a clear blank so builders can customise paint, decals and weight distribution without factory markings.

This shell performs as a lightweight aerodynamic envelope for 1/10 scale tuning. You will need to trim wheel arches, firewall and bumper cutouts to match tyre diameters, shock travel and servo linkages, and test-fit post positions prior to final mounting. The plain surface also helps when adjusting ride height and roll without graphics concealing small deflections.

Practical guidance: use standard RC body posts and mounting hardware for FAZER Mk2 FZ02, trim using a fine hobby blade and scissors, and secure with clips after verifying clearance around electronics. Paint the inside with polycarbonate-specific paints and allow thorough curing before stress-loading the shell.
Remark :
Due to limited stock availability, please notice that some Kyosho items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

How should I prepare the shell before painting?

Clean the inner surface with isopropyl alcohol, mask off trim lines, then apply polycarbonate paints in light coats. Allow each coat to dry fully before additional layers and before trimming.

Will fitting this body change handling characteristics?

Yes, different body shapes can alter aero balance and weight distribution. Use the blank shell to evaluate ride height and roll center changes before committing to a final paint and decal layout.

What mounting hardware is recommended for secure fitting?

Standard body posts and clips compatible with FAZER Mk2 FZ02 are recommended. Consider nylon or metal posts depending on how often you remove the shell.

Copyright © 2008-2026 rcjaz.com.au All rights reserved