Kyosho Inferno MP7.5 Front lower arm lock plate 3mm Alloy-7075 HMP7508F by GPM  [HMP7508F]

Lower arm lock plate description

This machined lower arm lock plate is tailored for the Kyosho Inferno MP7.5 front gearbox area. At 3mm thickness and made from Alloy-7075, it serves as a simple direct-fit replacement or spare for the MP7.5 lower arm mounting point.

Functionally the plate stiffens the lower arm pivot next to the front gearbox to reduce local flex under load and maintain alignment when adjusting setup on track. It is a reinforcing component rather than a geometry-altering part.

To install, remove the original plate, transfer any bushings or spacers, and refit using the stock fasteners. Tighten with an appropriate hex driver and confirm fastener torque after initial running to ensure secure fitment.

Tuning advice: incorporate this plate into a wider setup plan that includes shock valving, spring selection, and arm position choices. It is intended for use on Kyosho Inferno MP7.5 chassis only.