Kyosho Mini Inferno 09 Rear Damper Plate Graphite GMIF030 by GPM  [GMIF030]

Rear shock plate in graphite

This graphite rear damper plate is an RC replacement designed for Kyosho Mini Inferno and Mini Inferno 09 chassis and is supplied as a 1pc set with matching screws and lock nuts. The part functions as the mounting base for rear shocks and helps keep the shock tower and chassis aligned during tuning changes.

Construction note: made from graphite to deliver a lightweight yet stiff mounting surface appropriate for club racing and hobby running; this item is for model use only and not suitable for any full-size application.

Fit information: tailored for Mini Inferno and Mini Inferno 09 mounting patterns; measure your existing tower hole spacing to confirm compatibility before fitting.

Fitting advice: remove the factory damper plate and bolts, align the graphite plate to the tower holes, and fasten with the supplied screws and lock nuts. Start threads by hand and torque in stages to avoid misalignment. Use the correct hex driver for the supplied screws and inspect lock nuts after initial track time.

Tuning effect: replacing the stock plate with graphite may change flex at the rear shock mount, producing slight differences in rear-end behavior; adjust springs, oil, and mounting positions to fine tune handling.