KYOSHO Mini-Z AWD Compact Delrin Rear Ridge Rim DMZA601RW+1.0 by GPM  [DMZA601RW+1.0]

Mini-z AWD Delrin Rear Wide Ridge Rims (6p, 1.0mm Off set , Width 11mm) - 1pr - GPM DMZA601RW+1.0
Price:
AUD$9.73
Brand:
GPM
Model:
DMZA601RW+1.0
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Compact Delrin rear ridge rims for Mini-Z AWD

Designed for KYOSHO Mini-Z AWD vehicles, this rim is listed as DMZA601RW+1.0 and is produced in Delrin. It uses a six-point mount, features a 1.0mm offset and measures 11mm across the rim width to suit Mini-Z AWD rear hubs.

To install, remove the factory wheel, align the rim to the six-point hub and secure using the original screws. After fitting, rotate the wheel to check for tyre or body interference and adjust as required to maintain suspension travel.

As an upgrade this rear-wide ridge rim modifies rear track and contact patch dynamics, helping to fine tune rear grip and handling on carpet or compact layouts. Carry out incremental tests and keep tyre type consistent when evaluating changes.

What tyre width works best with an 11mm rim?

Tyres rated for 11mm rims provide proper bead seating and profile. Verify overall tyre diameter to make sure it does not contact the body or suspension at full travel.

Is Delrin durable enough for track use?

Delrin offers good wear resistance for scale wheels and performs well on carpet and indoor surfaces. Inspect regularly for wear if you run abrasive tracks or hard compounds.

Will this change require body trimming?

Possibly; the wider track may reduce clearance on some bodies. Check fitment after mounting and trim inner wheel arches if necessary to avoid rubbing.

Copyright © 2008-2026 rcjaz.com.au All rights reserved