KYOSHO Mini-Z AWD Ridge Wheel Upgrade Delrin 8.5mm Offset 1.5mm DMZA601F/R+1.5 by GPM  [DMZA601F/R+1.5]

Delrin ridge wheels for compact track performance

This front and rear ridge rim set suits KYOSHO Mini-Z AWD platforms and is identified as model DMZA601F/R+1.5. The rims are manufactured in Delrin and specified at 1.5mm offset with an 8.5mm width as a direct wheel upgrade for Mini-Z AWD models.

Delrin construction brings dimensional stability and a low-friction bead area, making these rims appropriate for thin-profile tyres and fine steering adjustments common in short-track and indoor racing. They let tuners alter handling without changing suspension geometry.

Fitment is standard for Mini-Z AWD hubs: remove the original rim, fit the Delrin rim on the wheel hex or adaptor you use with the MR-03 AWD family, and secure using your regular wheel retention method. Always inspect tyre seating and clearances when changing offsets or widths, and rebalance after mounting tyres.

Practical tuning: the 1.5mm offset will subtly change track width versus stock and can influence turn-in and grip balance; use these rims when experimenting with front/rear tyre pairings and setup adjustments.