KYOSHO Mini-Z F1 0 Degree Front Toe Linkage MKF-02/0 by 3Racing  [MKF-02/0]

Front toe link for Mini-Z F1 chassis

This front toe in/out link is produced for KYOSHO Mini-Z F1 chassis and supplied as the MKF-02/0 replacement. It fixes the front toe at 0 degrees to provide a neutral reference for steering geometry while setting up the car on track or on the bench.

Compatibility is limited to Mini-Z F1 versions that use the same front linkage mount type found on KYOSHO Mini-Z F1 models. The part serves as a direct-fit spare or an alternative to OEM linkage when a 0 degree toe datum is required for handling verification or staged adjustments.

Fitting notes: remove the old front linkage following the chassis manual, check ball studs and steering posts for wear, and fit this linkage using the chassis' original fasteners. Use toe adjusters or alternate-length links to change toe if needed, making sure left and right measurements match to prevent binding.

Tuning role: a 0 degree front linkage gives a straightforward neutral starting point for steering feel, making it easier to evaluate suspension and roll changes without toe-driven understeer or oversteer. Swap to angled linkages to test toe effects through entry and mid-corner.

For routine maintenance or controlled tuning, this linkage is a sensible spare for Mini-Z F1 rigs using the KYOSHO front linkage interface.