Kyosho Mini-Z F1 Front Toe In/Out Linkage -2 Degree MKF-02/-2 by 3Racing  [MKF-02/-2]

Fixed front toe linkage for Mini-Z F1

This compact front toe in/out linkage is aimed at Mini-Z F1 cars and carries the MKF-02/-2 identifier. It establishes a fixed -2 degree toe at the front hubs to affect steering response and mid-corner stability on small-scale tracks.

As an upgrade or repair component, the linkage replaces the stock front toe connector and provides a straightforward tuning change: negative toe that increases initial turn-in or helps keep the car settled through transitions. The item is an aftermarket accessory for compatible Mini-Z F1 chassis only.

Installation is routine for Mini-Z maintenance: remove the front hub assembly as needed, swap in the MKF-02/-2, and check wheel alignment on a flat surface. Make sure fasteners are tightened and steering path is clear. No specialist tools are required beyond small hex drivers common to Mini-Z work.

Handling advice: a fixed -2 degree toe usually improves corner entry bite and can lower understeer in low traction situations, but may reduce straight-line tracking. Change other settings such as tyre pressure and ride height step by step to measure combined effects.

For drivers wanting a simple, reliable -2 degree front toe setup on Mini-Z F1 cars, this linkage offers an easy swap without altering the servo or steering geometry beyond the fixed toe angle.