Kyosho Mini-Z MR-015 Graphite Body Mount Upgrade KZ-14/6/SG by 3Racing  [KZ-14/6/SG]

Overview and Purpose of the Graphite Plate

This graphite reinforced plate is an RC-scale replacement intended for the Kyosho Mini-Z MR-015 chassis paired with a McLaren F1 GTR body shell. It reinforces the connection between body and chassis by adding graphite stiffness at the mounting area while keeping chassis geometry unchanged. The text here covers compatibility and the functional role rather than mechanical properties.

Compatibility is restricted to MR-015 platforms using the McLaren F1 GTR style body shell as described. Confirm body mount locations and test-fit before completing installation. Do not assume fitment across other Mini-Z variants without verification.

Installation steps: remove the stock body mounting plate from the MR-015, position the graphite plate at the factory mounting points, and fasten using the original screws or matching hardware. Maintain moderate torque to avoid stressing the composite plate. No extra electronics or mechanical mods are required for a basic fit.

Tuning impact: the plate increases stiffness at the body-to-chassis interface which can alter steering feedback and weight transfer on small-scale models. Make small, incremental adjustments to suspension or body positioning after fitting to reach the desired balance. This item is intended for chassis tuning and body fit optimisation only.