Kyosho MP11 Left Front Knuckle Arm IF712-L  [KY-IF712-L]

Kyosho IF712-L - Front Knuckle Arm(L/MP11)
Price:
AUD$58.68
Brand:
Kyosho
Model:
KY-IF712-L
GTIN:
4548565518883
Condition:
Brand New
Write a review

Left-side knuckle details

This Kyosho IF712-L front knuckle arm functions as the left steering knuckle and is supplied as a service replacement for MP11-series 1/8-scale on-road cars. It secures the front wheel spindle and interfaces with steering linkages and the king pin assembly.

Replace this knuckle to recover proper steering geometry after wear or an accident; fit it in place of the original to retain factory alignment. While installing, check mating faces and fasteners, clean bearing seats, and ensure the spindle rotates freely before final torqueing.

Note on related items: the sleeves that secure the upper and lower parts of the knuckle are sold separately as IFW647 KPI King Pin Sleeves (4 pcs).
Remark :
Due to limited stock availability, please notice that some Kyosho items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

What is the basic installation sequence for this knuckle?

Remove the wheel and spindle, clean mounting surfaces, fit the knuckle, insert king pin sleeves if required, then reassemble the spindle and wheel while checking free rotation.

Will this affect steering feel or geometry?

If fitted correctly as a like-for-like replacement, steering geometry and feel should match the original setup. Verify toe and camber settings after installation.

Can I upgrade to reinforced knuckles for harder use?

Aftermarket reinforced parts exist for some platforms, but confirm compatibility with MP11 and test handling changes before committing to permanent upgrades.

Where do the king pin sleeves fit in the assembly?

The IFW647 KPI King Pin Sleeves (4 pcs) fit between the knuckle halves and the king pin; they are sold separately and should be inspected for wear when replacing the knuckle.

Copyright © 2008-2026 rcjaz.com.au All rights reserved