Kyosho UBW007 5.8mm Velvet Shock Flange Balls (4 pcs) - compatible with LAZER ZX  [KY-UBW007]

Kyosho UBW007 - Velvet Coating 5.8mm Shock Flange Ball(4pcs)
Price:
AUD$22.18
Brand:
Kyosho
Model:
KY-UBW007
GTIN:
4548565524655
Condition:
Brand New
Quantity Discount
Unit Price You Save
2 $17.89 each $8.59 or 19%
3+ $17.00 each $15.54 or 23%
Write a review

Suspension pivot flange ball details

These are Kyosho UBW007 velvet coating 5.8mm shock flange balls supplied as a set of 4 pcs for RC-scale models. They function as spare shock end components where a 5.8mm flange ball is required, offering a soft-coated contact face to limit binding while keeping the aluminium core exposed for wear visibility.

Fitting these units is a routine maintenance task: remove the worn flange ball, check the mating surfaces for damage, and press the new UBW007 flange ball onto the shock shaft or linkage stud. Confirm the suspension moves freely through its travel after installation. Typical hand tools used for ball end changes are adequate for this job.

From a setup perspective, replacing aged or rough flange balls with lightly coated ones can improve low-speed compliance and repeatability of the suspension, aiding in more consistent tuning of damper and spring settings across runs.

Sold as a pack of four, the UBW007 flange balls are a useful service item to preserve smooth pivot operation and consistent handling during driving sessions and setup work.
Remark :
Due to limited stock availability, please notice that some Kyosho items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Will these reduce binding in an old shock set?

Yes — replacing worn flange balls with the velvet-coated UBW007 pieces can lessen binding and restore smoother pivot movement, particularly at low velocities.

Can the coating be damaged by cleaning solvents?

Aggressive solvents and abrasive cleaners can degrade the velvet finish; use a soft cloth and mild cleaning to preserve the coating.

Are these suitable for all shock brands?

They suit shocks and rod ends that accept 5.8mm flange balls. Always confirm the specified flange size on the shock or linkage before fitting.

How should I inspect them during maintenance?

Check for coating wear, flats on the ball face, and any corrosion. Replace if movement becomes rough or the coating shows significant abrasion.

Copyright © 2008-2026 rcjaz.com.au All rights reserved