Kyosho VZ495H Track Tough Front Bulkhead for V ONE R4  [KY-VZ495H]

Kyosho VZ495H - Hard Front Bulk Set(R4 Evo.3/R4s)
Price:
AUD$21.68
Brand:
Kyosho
Model:
KY-VZ495H
GTIN:
4548565482719
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
Spares / Hop-ups - Kyosho - V One Series - V ONE R4 category
Write a review

Track-Grade Front Bulkhead by Kyosho

The VZ495H front bulkhead is a Kyosho replacement set tailored to V ONE R4 Evo.3 and R4s vehicles. It focuses on adding front-end stiffness to help the car hold a line under aggressive inputs.

On-Track Advantages

With reduced flex at the front, drivers often see sharper response to steering inputs and a more consistent feel through successive laps. The design preserves factory mounting so changes are predictable and repeatable.

Installation and Compatibility

Fitting the VZ495H is designed to be a simple swap with the stock bulkhead. Check all linkages for wear during installation and recheck alignment after the first test run to confirm handling changes.

Remark :
Due to limited stock availability, please notice that some Kyosho items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.
Aftermarket bumpers that use the same mounting points should be compatible, but verify that there are no clearance issues with your chosen bumper before final assembly.
By stabilising the front end, the VZ495H can lead to more even tyre loading and in some cases reduce irregular wear when setups are adjusted accordingly.
No trimming is normally required for V ONE R4 Evo.3 and R4s. Fitment should be direct but always confirm part orientation and fastener torque during installation.

Copyright © 2008-2025 rcjaz.com.au All rights reserved