LAW88 Slipper Adjuster & Spring Replacement for LAW88 - Kyosho LAW88-03  [KY-LAW88-03]

Kyosho LAW88-03 - Adjust Screw & Spring Set (ZX7.5)
Price:
AUD$0.00
Brand:
Kyosho
Model:
KY-LAW88-03
GTIN:
4548565524600
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Slipper adjust screw and spring for LAW88 unit

The Kyosho LAW88-03 replacement set provides the adjust screw and spring components intended for the LAW88 one-way slipper clutch in radio controlled models. These RC-scale pieces are meant to set preload and shape engagement behavior within the slipper hub rather than modify main drivetrain parts.

Use the replacement to refresh worn adjusters or springs, restore reliable engagement, or as part of progressive tuning to fine tune traction delivery. The adjust screw governs preload and the spring supplies resistance to slipping; minor screw changes yield clear differences in feel.

Fitting notes: follow your chassis manual to access the slipper housing, swap the old screw and spring for the new items, then reassemble. Make small adjustments and verify engagement on a bench or low-speed test before full operation. This product is intended specifically for the LAW88 one-way slipper clutch assembly.
Remark :
Due to limited stock availability, please notice that some Kyosho items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Does this kit fit other slipper types?

No, the kit is tailored for the LAW88 one-way slipper clutch assembly and replaces that assembly's adjust screw and spring specifically.

Are any parts reusable from the old assembly?

If other slipper components are in good condition they can be reused, but inspect mating surfaces and bearings; replace this adjust screw and spring if wear is visible.

What is the best approach to stepwise tuning?

Start from a baseline, record each click or turn of the adjust screw, and test after each small move. This method makes it easy to return to known settings and judge changes.

How should I guard against corrosion?

Keep parts clean and dry, apply light corrosion protection where appropriate, and routinely inspect the screw and spring for rust or pitting during servicing.

Copyright © 2008-2026 rcjaz.com.au All rights reserved