LAZER ZX Compatible Stabilizer Set 1.7-2.0/ZX7.5 - Kyosho LAW57B  [KY-LAW57B]

Adjust rear roll stiffness

This stabilizer set is an RC-scale replacement part supplied under the Kyosho LAW57B identifier and carries the sizing designation shown in the product name. It is intended for use where a selectable stabilizer diameter or profile is required to adjust rear roll characteristics on compatible LAZER ZX series models.

The set acts as a tuning aid to modify lateral stiffness and the way the rear end transitions into roll. Selecting different items from the set changes how load is moved across the chassis during cornering, helping balance mid-corner grip against rotation without touching suspension geometry settings.

Installation is simple for anyone comfortable with routine 1/10 electric RC work: remove the factory rear stabilizer linkage, mount the LAW57B parts onto the stabilizer points, then check full travel clearance. Use typical RC tools like hex keys and a small spanner and recheck fasteners after a short test session.

When testing, change values gradually and evaluate on a surface that matches your regular running conditions. Lower stabilizer dimensions tend to promote rotation, while higher values resist roll and favour stability at higher speeds.