LOSI LMT 4WD Solid Axle Servo Mount 7075 Alloy LMT024L by GPM  [LMT024L]

7075 alloy steering mount for LMT

This steering servo mount plate is an aftermarket 1/5 standard 7075 alloy upgrade crafted for LOSI LMT solid axle platforms to replace the factory servo mounting and provide a stiffer mounting point. The plate is aimed at improving mechanical support when using larger or high-torque servos, cutting flex under load while keeping fitment aligned with LOSI LMT chassis layouts.

Installation uses the supplied cap head and flat head screws along with thin stainless shims to set accurate stack height and alignment. The plate locates over the factory servo area and keeps the servo footprint while offering more robust anchor points; installers should confirm spline alignment and horn clearance before final tightening. The shims offer minor positional adjustments without altering the chassis.

Tuning guidance: when fitting a larger servo consider mount height, horn throw and linkage geometry to prevent binding at full lock, and check steering centring after fitment. The alloy plate alters local chassis stiffness so re-check steering endpoints and adjust dual-rate and EPA as needed for predictable steering.

Use this plate to firm up the servo mounting area on LOSI LMT solid axle builds, and confirm steering geometry and servo clearance during installation to retain consistent handling.