Master Airscrew MA2010C Classic 20x10 Prop for RC Models  [MA2010C]

20x10 Performance Prop for RC Models

The Master Airscrew MA2010C is a 20x10 propeller supplied as a replacement or optional upgrade for electric RC aircraft specifying a 20x10 blade. It is sold as an accessory to help pilots adjust thrust and trim rather than as a component of the motor itself.

To install on frames that accept 20x10 props, confirm the motor or adapter shaft diameter and thread, install using the proper washer and nut or collet, and tighten according to the hub manufacturer's torque specifications. Double check direction of rotation and prop clearance before flying.

Tuning guidance: a 20x10 increases pitch which shifts the loading toward higher torque at reduced RPM compared with lower pitch props. Employ motor current monitoring and ensure a precise prop balance to minimize vibration and protect drivetrain components.

Care guidelines: balance the prop before fitting, visually inspect for nicks or cracks after any strike, and replace any damaged blades. Maintain correct fastener torque and apply thread locker on threaded shafts when recommended by the airframe or motor supplier.

For those standardizing on a 20x10 for sport or scale electrics, the Master Airscrew MA2010C is a practical, serviceable choice with consistent aerodynamic behavior and easy replacement handling.