Mini 4WD Performance Small-Diameter Wheel & Tyre Upgrade for Mini 4WD / Mini 4WD PRO - Tamiya 95708  [95708]

Tamiya 95708 - Jr Small Diameter Low-Friction Low Profile Tires w/Y-Spoke Carbon Wheels (Asia Challenge)
Price:
AUD$9.33
Brand:
Tamiya
Model:
95708
GTIN:
4950344957088
Condition:
Brand New
Available in shop
Write a review

Performance-oriented Y-spoke carbon wheels with low-profile maroon tyres — Tamiya 95708

Designed for enthusiasts tuning Mini 4WD machines, this small-diameter wheel and tyre set supplies four carbon fiber-reinforced plastic Y-spoke wheels and four matching small-diameter, low-friction, low-profile maroon tyres. The stiffer wheel bodies help maintain wheel posture while the low-profile tyres reduce bounce and rolling drag through corners.

  • Carbon fiber-reinforced plastic wheel construction for improved rigidity and consistent wheel geometry.
  • Small-diameter, low-friction, low-profile tyres; sidewalls carry white printed TAMIYA MINI 4WD / ASIA CHALLENGE text and the TMAC logo.
  • Suitable for Mini 4WD and Mini 4WD PRO cars configured for small-diameter tyres; some chassis or body tubs may require slight trimming for clearance.
  • Do not use solvents on the printed sidewalls; clean gently to preserve the printed detail.

Use this set to refresh race machines or to replace worn parts on display models. Confirm clearance and mounting orientation before final installation to avoid rubbing or interference.

Will switching to these small-diameter tyres change lap times?

Their lower rolling resistance and reduced vertical movement can improve consistency on some tracks, though overall lap time gains depend on setup and course layout.

Are any chassis reinforcements necessary with these wheels?

No special reinforcements are required, but verify axle alignment and hub seating; the stiffer wheel body helps retain geometry under load.

How do I check for body clearance?

Fit the wheels and rotate the assembly, then inspect inner guards and outer wheelarches; trim or use spacers where contact occurs.

Can I polish the printed sidewalls to shine them?

Avoid polishing agents and solvents on the printed sidewalls; gentle wiping is the safest method to maintain the print.

Are these compatible with Mini 4WD PRO without modification?

They are compatible with Mini 4WD PRO cars prepared for small-diameter tyres, but confirm clearance and mounting details on each chassis before racing.

Copyright © 2008-2026 rcjaz.com.au All rights reserved