Mini 4WD Roller Stopper Low-Profile M4WD-11/BK by 3Racing  [M4WD-11/BK]

Tamiya Mini 4WD Roller Stopper (black) - 3RACING M4WD-11/BK
Price:
AUD$4.44
Brand:
3Racing
Model:
M4WD-11/BK
Condition:
Brand New
Write a review

M4WD-11/BK black lane stopper suited to Mini 4WD chassis

The 3Racing M4WD-11/BK is a black, low-profile roller stopper designed as a compact lane guard for 1/32 Mini 4WD cars. This copy treats the item as an accessory for knowledgeable builders and collectors focused on fitment and looks rather than a direct speed upgrade.

These stoppers are commonly chosen when a small contact point is needed to keep body panels unobstructed. Important fit checks include matching the stopper to common mounting patterns on standard Mini 4WD chassis and ensuring clearance from adjacent rollers and bodywork. This is general guidance and not a full installation manual.

For competitors running MA, MS, AR, FM-A and similar performance chassis, test the stopper position to make sure it does not interfere with roller function. Avoid applying race setup advice to Wild Mini 4WD or Scale Mini 4WD series without confirming their specific mounting requirements.

Can the M4WD-11/BK be mounted on Super-II frames?

It depends on the chassis hole layout; many standard frames accept the stopper with slight offset or alternate spacer use. Measure and trial-fit to confirm.

Does the stopper replace rollers on corners?

No, it is intended as a bumper-style contact point and not a substitute for rollers. Make sure it does not impede roller rotation.

Which screws should I use to fit it?

Use small machine screws matching the chassis thread size and suitable spacers to achieve the correct clearance; tighten progressively to avoid misalignment.

Will it damage the body paint over time?

Any contact can eventually mark paint. Inspect contact points periodically and fit thin protective material if necessary to protect painted panels.

Copyright © 2008-2026 rcjaz.com.au All rights reserved