Mini-T Rear Maintenance Kit MT-040RR by 3Racing  [MT-040RR]

Mini-T rear assembly rebuild

The kit services the rear assembly on the Team Losi Mini-T and is provided as MT-040RR. It is intended to replace worn rear parts so the suspension returns to its original movement and alignment.

Designed for maintenance and handling tweaks: swap out worn bearings, links, and mounts to remove rear looseness and regain consistent traction. Apply the kit when handling becomes unpredictable or rear play is evident.

Installation overview: disassemble the rear unit, remove defective parts, fit the replacements from the kit and verify free rotation and alignment before final torque. Inspect all contact surfaces and replace any fatigued fasteners. After assembly, check suspension travel and wheel alignment both statically and during a short roll test.

Practical tuning notes: replacing rear components can change toe settings, camber recovery and ride height; make measured adjustments and test on a familiar track surface to assess changes. Keep setup records so you can restore a baseline if needed.