Mini-Z AWD Aftermarket Rear Alloy BBS Rims 11mm MZA009RW/0 by GPM  [MZA009RW/0]

Aftermarket BBS-style alloy rear rims for Mini-Z AWD

This aluminium rear wheel set is an aftermarket upgrade for Mini-Z AWD MR-03 models aimed at altering rear track and handling balance. Use model number MZA009RW/0 when confirming part matches or ordering spares.

The product name shows a BBS-inspired alloy rear rim with a wide sinkage profile, 0mm offset and an 11mm rim width. Swapping to a wider rear rim on an AWD Mini-Z shifts tyre seating and contact patch distribution, which can increase rear traction and change mid-corner behaviour. These rims are useful for club nights and short indoor circuits where fine setup changes matter.

Fitment advice: check hex and hub compatibility on your MR-03 AWD before finalising installation, use appropriate hex drivers for wheel nuts, and check for any interference with rotors or bodywork. If body clearance is tight, test-fit with the intended tyre and consider thin shims for clearance adjustments.

Maintenance and setup notes: aluminium rims are robust but inspect tyre seating areas for signs of wear after frequent tyre changes. Keep mating surfaces clean, check for burrs, and pair these rears with the correct tyre compound and front wheel selection to achieve the balance you want without overloading the AWD system.