Mini-Z AWD 3 Degree Rear Toe Linkage Upgrade - AWD-09/3 by 3Racing  [AWD-09/3]

Tuned rear toe link for Mini-Z AWD applications

This rear toe in/out linkage is intended for the Kyosho Mini-Z AWD chassis, replacing the stock rear link to provide a stable 3 degree toe setting. The unit is finished in purple and suits enthusiasts who run controlled setup comparisons on Mini-Z AWD models.

The part alters the rear toe geometry so you get a known baseline for corner entry and mid-corner rotation. Fit it when you need consistent rear alignment for setup sessions or quick changes between handling configurations.

Installation notes: remove the OEM rear toe linkage from the Mini-Z AWD and transfer any compatible ball cups or spacers from the original item. Reuse the stock mounting hardware where possible and confirm the linkage moves freely without any binding before operating the car.

Tuning tips: use the stock setting as your starting point, install the 3 degree link and then adjust incrementally alongside front toe and roll center changes. Run trials on the same surface to see how small rear toe changes affect turn-in and rotation.