Mini-Z AWD Front 5-Spoke Wheel 0 Offset AWD-18/F0/SI by 3Racing  [AWD-18/F0/SI]

Kyosho Mini-Z AWD Front 5 Spoke Rim (0 Offset) - 3RACING AWD-18/F0/SI
Price:
AUD$6.54
Brand:
3Racing
Model:
AWD-18/F0/SI
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Front Rim - 5-Spoke for Mini-Z AWD

This five-spoke front rim serves as a replacement wheel for Kyosho Mini-Z AWD vehicles and is catalogued under part AWD-18/F0/SI. The 0 offset places the mounting surface close to the hub centreline, affecting track width and side clearance when fine-tuning a Mini-Z AWD for different surfaces.

Fitment is straightforward for those who have done Mini-Z wheel swaps: remove the existing wheel, seat the rim on the original wheel hex or adapter, check that the rim sits flush against the hub, then reassemble tyre and wheel. There is no need for aftermarket adapters beyond the normal Mini-Z AWD mounting hardware.

As a tuning tool, a 0 offset front rim keeps the wheel in a neutral lateral position, which helps produce consistent front-end responses and makes it easier to test tyre and suspension changes without changing lateral alignment.

Is the rim supplied with nuts or hexes?

This listing is for the rim itself; use the vehicle's existing wheel hex and securing hardware. Check your kit contents to confirm what you already have.

Will this affect steering scrub radius?

A 0 offset keeps the wheel near the hub centreline, which tends to maintain a neutral scrub geometry and helps isolate other setup changes from lateral wheel movement.

Any checks after fitting?

After fitting, verify the wheel rotates freely without contact, confirm hex engagement, and test on a short run to ensure predictable steering and clearance.

Copyright © 2008-2026 rcjaz.com.au All rights reserved