Mini-Z AWD Low Offset Alloy Rims 18p 8.5mm MZA803F/R/0 for KYOSHO by GPM  [MZA803F/R/0]

Mini-z AWD Alloy Front/Rear Sinkage Rims (18p, 0mm Off set , Width 8.5mm) - 1pr - GPM MZA803F/R/0
Price:
AUD$8.21
Brand:
GPM
Model:
MZA803F/R/0
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Low Offset Alloy Wheels for Mini-Z AWD

This pair of machined aluminium sinkage rims is intended for Mini-Z AWD applications and carries the model number MZA803F/R/0. The product listing specifies the 18p mounting pattern, 0mm offset and an 8.5mm wheel width.

Use these wheels to alter appearance and to fine-tune tyre position on Mini-Z AWD cars. The 0mm offset with an 8.5mm width changes tyre placement relative to the wheel arch and may affect handling at model scale when combined with suitable wheel hexes and tyres.

Mounting guidance: designed for Mini-Z AWD wheel assemblies—confirm your wheel hex, tyre profile and 18p mount compatibility, and check clearance with the body shell to avoid rubbing under steering or suspension travel.

Can I run these with standard Mini-Z tyres?

Yes, but ensure the tyre inner diameter matches the rim and that the 18p mounting pattern aligns with your wheel hex to secure a proper fit.

Will offset change handling much?

At model scale the 0mm offset with 8.5mm width subtly shifts tyre stance and can alter cornering balance, depending on tyre compound and suspension setup.

Any special tools needed?

Standard Mini-Z wheel tools are sufficient; check hex fitment and tighten wheel fixings to the recommended specification to prevent loosening.

Copyright © 2008-2026 rcjaz.com.au All rights reserved