Mini-Z AWD Rear Alloy Sinkage Wheels 18p 11mm 1.0mm offset MZA803RW/+1.0 by GPM  [MZA803RW/+1.0]

Mini-z AWD Alloy Rear Wide Sinkage Rims (18p, 1.0mm Off set , Width 11mm) - 1pr - GPM MZA803RW/+1.0
Price:
AUD$9.56
Brand:
GPM
Model:
MZA803RW/+1.0
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Alloy rear sinkage wheels for Mini-Z AWD tuning

This alloy rear rim set is made for Mini-Z AWD scale use and supplied by GPM under model MZA803RW/+1.0. It meets the 18p designation with a 1.0mm offset and an 11mm rim width to tweak rear wheel fitment and seating depth on compatible Mini-Z AWD chassis.

The parts are intended for RC-scale wheel placement and tyre mounting rather than any full-size use. Sold as one pair, the rims are aimed at hobbyists wanting to adjust rear track, tyre tuck or clearance during MR-03 AWD style Mini-Z AWD setup work.

Installation notes: verify spline and hub fit on MR-03 AWD hubs before final mounting, check tyre seating across the 11mm rim, and confirm wheel balance after fitting. These alloy hop-up rims should be installed using normal Mini-Z AWD hardware and mounting technique.

Do I need special hardware to fit these?

No special hardware is required beyond standard Mini-Z AWD wheel fixing parts, but confirm hub spline match and use the correct screws or glue method for your setup.

Can these rims increase clearance?

Depending on offset and tyre profile, the 1.0mm offset and 11mm width can alter clearance; test fit on the chassis to verify any gains or rubbing issues.

Are these suitable for competition use?

They are an alloy aftermarket upgrade for scale appearance and fitment changes. Check your event rules and test durability under your driving style before race use.

Copyright © 2008-2026 rcjaz.com.au All rights reserved