Mini-Z AWD Rear Wide Sinkage Rims 18p Bolt Pattern 11mm MZA803RW/0 by GPM  [MZA803RW/0]

Mini-z AWD Alloy Rear Wide Sinkage Rims (18p, 0mm Off set , Width 11mm) - 1pr - GPM MZA803RW/0
Price:
AUD$9.73
Brand:
GPM
Model:
MZA803RW/0
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Alloy Rear Wide Sinkage Rims for Mini-Z AWD

Supplied as one pair (2 pcs), these alloy rear rims are built for Mini-Z AWD micro cars. The rim is an alloy rear wide sinkage design featuring 11mm width, 0mm offset and an 18p bolt pattern to support wider tyres and a broader rear stance.

Designed as an aftermarket wheel option for Mini-Z AWD platforms, these rims allow you to alter rear track and tyre seating. Always confirm that the wheel hex and hub interface on your chassis match the rim specifications before fitting.

Fitting steps: remove the existing rear wheels, slide the new rim onto the hub ensuring the hex seats fully, and tighten using the original nuts or matching 18p hardware. After fitting inspect tyre seating and body clearance and perform a slow run to check for interference. Wider rear rims will change handling balance, so consider adjustments to rear suspension and sway bars to tune corner entry and traction.

Do I need special hardware to fit these rims?

Typically you can use your original 18p wheel nuts if they match; otherwise use hardware that matches the 18p bolt pattern and hex size of your chassis.

Will these rims improve cornering on carpet or asphalt?

Wider rear rims can alter the tyre contact patch and rear traction, which may help cornering stability on some surfaces but requires suspension tuning to optimise performance.

Any routine checks after installation?

Check wheel nut torque, tyre seating, and perform a clearance sweep at low speed. Recheck after a short run to ensure nothing has loosened or rubbed.

Copyright © 2008-2026 rcjaz.com.au All rights reserved