Mini-Z AWD Scale Alloy Sinkage Rims 6p 8.5mm Width 2.5mm Offset - MZA603F/R/+2.5 by GPM  [MZA603F/R/+2.5]

Scale alloy sinkage rims for Mini-Z AWD

These are a pair of 6p aluminium sinkage rims, model MZA603F/R/+2.5, produced for Mini-Z AWD scale use. Each wheel is 8.5mm wide with a fixed 2.5mm offset and will suit Mini-Z AWD platforms and many MR-03 AWD variants where clearances match the wheel profile.

Provided as aftermarket tuning accessories, these rims are intended to change wheel stance and geometry rather than promise specific lap time gains. A fixed 2.5mm offset moves the wheel laterally on the hub and can affect track width and clearance around suspension or the body shell. The alloy build reduces flex compared with standard plastic wheels and can help achieve consistent balancing and setup repeatability.

Fitting advice: remove the factory wheels and trial-fit these rims, ensuring clean seating on the hub and checking for any rubbing during rotation. Use the original wheel retainers to secure the rims, inspect for runout, and apply a light balance if possible to reduce vibration. Tweak handling settings incrementally and keep notes to allow easy reversal of changes.