Mini-Z AWD Tuning Spring Compatible with MR-03 - AWD-14 by 3Racing  [AWD-14]

Kyosho Mini-Z AWD Damper Spring - 3RACING AWD-14
Price:
AUD$7.10
Brand:
3Racing
Model:
AWD-14
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Mini-Z AWD Tuning Spring

This damper spring is an RC spare intended for Kyosho Mini-Z AWD platforms and MR-03 AWD variants. It fits into standard Mini-Z AWD shock assemblies as a direct replacement to restore or adjust suspension characteristics without changing shock internals.

Fitting is straightforward for experienced modders: remove the wheel and shock assembly, bleed off shock pressure to reach the spring, swap it out and reassemble. Use the correct small tools and confirm the spring is seated correctly to avoid binding across the suspension travel.

As a tuning component the spring alters vertical compliance and the car's transient behavior. Modifying spring rate will influence ride height, initial bite and mid-stroke support on AWD Mini-Z chassis, so change one parameter at a time and evaluate handling on a predictable surface.

Can I use this spring on other Mini-Z versions?

It is designed for Mini-Z AWD shock assemblies; compatibility with non-AWD Mini-Z shocks is limited, so confirm fitment before installing.

Do I need to change other parts when swapping springs?

Not required, but consider checking shock shafts and seals and test handling to decide if changing oil or pistons is beneficial after rate changes.

How large a change should I make between spring rates?

Make small incremental changes and drive controlled laps; small-scale cars respond noticeably, so one-step changes are usually enough to assess the effect.

Copyright © 2008-2026 rcjaz.com.au All rights reserved