MP10 Compatible Suspension Bush Set - Kyosho IF616WC (White)  [KY-IF616WC]

Kyosho IF616WC - Color Sus. Bush Set (White/MP10)
Price:
AUD$18.06
Brand:
Kyosho
Model:
KY-IF616WC
GTIN:
4548565470167
Condition:
Brand New
Quantity Discount
Unit Price You Save
2 $15.17 each $5.78 or 16%
3+ $14.41 each $10.95 or 20%
Write a review

Purpose and Fit for MP10

The Kyosho IF616WC bush set provides white suspension pivot bushes intended for MP10 chassis upkeep and tuning adjustments. The visible colour makes it easy to spot replaced pieces during setup work.

These bushes replace worn pivot interfaces on MP10 models. They form the interface between linkage pins and suspension arms, helping to reduce slack and preserve repeatable suspension geometry when assembling shocks and arms.

Fitting is a routine job for anyone used to MP10 teardown: remove the arm pivots, press out the old bushes, and carefully press the new bushes into place. Recheck the linkage travel after fitting to ensure smooth operation without excess play.

Compatibility

  • MP10

This part is intended for 1: scale RC suspension maintenance and tuning on MP10 chassis, providing a simple replacement to restore pivot contact and reliable setup checks.
Remark :
Due to limited stock availability, please notice that some Kyosho items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Do these bushes need lubrication?

Some builders lightly lubricate bushes with a small amount of silicone grease to reduce friction and noise, but excessive grease can attract dirt. Test a small amount and monitor performance.

Will replacing bushes change cornering balance?

Replacing loose or worn bushes improves consistency in suspension movement, which can help maintain predictable cornering behavior. It does not directly change spring or damper settings but improves repeatability during tuning.

What should I inspect during routine checks?

Look for play at pivot points, cracking or deformation of bushes, and ensure the linkage pins are not worn. Replace bushes showing any sign of movement that affects alignment.

Can I swap these into other Kyosho models?

This set is specified for MP10; while they may fit other models, you should confirm dimensions and clearances before fitting to avoid improper seating or interference.

Copyright © 2008-2026 rcjaz.com.au All rights reserved