MP11 Compatible Front Hub Carrier Right 18deg IF710-R by Kyosho  [KY-IF710-R]

Kyosho IF710-R - Front Hub Carrier (R/18deg/MP11)
Price:
AUD$78.72
Brand:
Kyosho
Model:
KY-IF710-R
GTIN:
4548565518876
Condition:
Brand New
Write a review

Tuning and fitment for MP11 right hub (18deg)

The Kyosho IF710-R is the right-side front hub carrier specified for the MP11 chassis and set to an 18deg steering angle. It provides the spindle mount for the front suspension and is intended as a direct replacement for the MP11 hub assembly.

Use this carrier as part of suspension tuning or when replacing a worn or damaged component. Retaining the designated 18deg right-side angle helps preserve the intended toe and caster balance used in MP11 setups. This component is for RC-scale vehicle maintenance and tuning only.

Installation reminder: ensure correct seating on the MP11 upright and examine related items such as bearings and hex fasteners for wear. After refit, check wheel alignment and steering throw before aggressive running to confirm handling behavior.

Remark :
Due to limited stock availability, please notice that some Kyosho items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.
Keeping the right-side IF710-R at 18deg preserves the steering geometry designers expect, so response should remain consistent with a correctly set MP11 setup.
The carrier itself fixes the steering angle; fine tuning toe and caster is done through setup adjustments elsewhere, but a true-to-spec carrier like the IF710-R is essential for predictable tuning results.
Verify fit on the MP11 upright, inspect bearings and screws for play, and confirm steering travel and wheel alignment after assembly to prevent unexpected handling changes at speed.

Copyright © 2008-2026 rcjaz.com.au All rights reserved