Mr. Color Spray Russet Mr.Hobby GSI-S81 Spray for RC Bodies  [GSI-S81]

Mr.Hobby S81 - Mr. Color Spray Russet
Price:
AUD$0.00
Brand:
Mr.Hobby
Model:
GSI-S81
Write a review

A ready aerosol for scale finishing

The Mr. Color Spray Russet (Mr.Hobby GSI-S81) is supplied as an aerosol for quick application on RC bodies and display models. It is designed for modellers who prefer a simple, brushless method to cover panels and trim.

Proper preparation is essential: degrease and clean the surface, remove dust and loose material, and mask adjacent areas. For building up colour use thin coats with about 10-20 minute flash time between passes to keep a smooth finish; allow complete cure before handling depending on conditions.

As part of finishing and detailing, this spray can be used as the base layer before decals or top coats. For targeted work, use low-distance short bursts and masking to minimise overspray and protect fine details.

How do I establish a good base coat with this spray?

Start with a clean, primed surface and apply several light passes to build colour gradually. Keep the can moving to avoid pooling and allow proper flash time between coats.

Any tips for precise detail work?

Mask surrounding areas and use short, controlled bursts from a consistent distance. Practice on scrap material to gauge spread and coverage before working on the actual part.

Can I apply clear coat over this spray?

Yes. After the spray has fully cured, you can apply compatible clear coats. Ensure sanding and cleaning as needed before topcoating for best adhesion.

Copyright © 2008-2026 rcjaz.com.au All rights reserved