MR-4TCSD Rear Hub Upgrade - Graphite 1deg - YOKSD415G10 by Yokomo  [YOKSD415G10]

Yokomo SD415G10 - MR-4TCSD GRAPHITE REAR HUB (1DEG)
Price:
AUD$20.61
Brand:
Yokomo
Model:
YOKSD415G10
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
Spares / Hop-ups - Yokomo - DP category
Write a review

Rear hub upgrade for precise drifting

The Yokomo YOKSD415G10 graphite rear hub is specified at 1 degree and intended for MR-4TCSD chassis drift setups. As an aftermarket replacement, it maintains the MR-4TCSD rear assembly mounting orientation while supplying a stiffer material choice compared to many stock plastics.

The 1 degree designation indicates the fixed hub angle that will affect rear toe and dynamic behavior during drift transitions. Installing this 1 degree hub is a tuning option for drivers looking to achieve a repeatable rear reaction during slide initiation and corner exits. It is provided for hobby chassis tuning and not for full-scale vehicle use.

Installation is straightforward for technicians familiar with MR-4TCSD rear assemblies because the hub is produced to align with the existing chassis attachment points. After fitting, confirm stub axle seating and recheck wheel alignment to ensure the intended toe angles and clearances.

Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

How will the 1 degree hub alter drift entry and rotation?

The fixed 1 degree geometry promotes a more controlled rear toe, leading to steadier rotation on entry and more predictable rotation speed through a slide compared with neutral-angle hubs.

Do I need special hardware to install it?

No special hardware is required; the hub is made to mate with MR-4TCSD rear mount points. Use the existing fasteners and ensure correct torque and seating during installation.

Can this hub be used with aftermarket stub axles?

It is compatible with MR-4TCSD-style stub axles; if using a nonstandard axle, verify diameter and mounting to ensure proper fit and geometry before track use.

Copyright © 2008-2026 rcjaz.com.au All rights reserved