Mr.Hobby B611 Aqueous Surfacer 1000 Hobby Primer Spray  [GSI-B611]

Mr.Hobby B611 - Aqueous Surfacer 1000 Water Based Spray
Price:
AUD$16.20
Brand:
Mr.Hobby
Model:
GSI-B611
Condition:
Brand New
Write a review

Reliable priming with Mr.Hobby B611

The Mr.Hobby B611 Aqueous Surfacer 1000 is a water-based spray primer tailored for RC enthusiasts seeking an even foundation for painting. Its formulation promotes uniform coverage and helps topcoats adhere cleanly.

Advantages of water-based surfacers

Water-based surfacers like Mr.Hobby B611 produce fewer strong odors than solvent primers and are more workshop-friendly. They dry fast and allow straightforward rinsing after use, helping keep your bench tidy.

Step-by-step application advice

Clean the model thoroughly and shake the can well before use. Hold the can 15-20 cm from the part and apply several light coats instead of one heavy pass. Let each coat dry fully to build a smooth finish.

Suitable for a range of materials and models

The Mr.Hobby B611 Aqueous Surfacer 1000 is compatible with RC cars, small planes and boats and bonds well to plastic, metal and resin, making it versatile for varied hobby projects.

What is the recommended distance to hold the can?

Aim for about 15-20 cm between the nozzle and the part and spray in light overlapping strokes for even coverage without runs.

Will this primer work under lacquer or acrylic paint?

Yes, the surfacer provides a good base for both lacquer and acrylic topcoats, but follow manufacturer drying recommendations before applying the final paint.

Do I need to degrease parts first?

Always degrease and remove dust before priming to ensure optimal adhesion. A quick wipe with isopropyl alcohol or warm soapy water is usually sufficient.

Can I use this on 3D printed parts?

Yes, it works well on many 3D printed plastics; light sanding before priming helps the surfacer grip fine details and layer lines.

Copyright © 2008-2025 rcjaz.com.au All rights reserved