Mr.Hobby GSI-B506 Surface No.500 Model Preparation Primer  [GSI-B506]

Mr.Hobby GSI-B506 - Surface No.500
Price:
AUD$7.82
Brand:
Mr.Hobby
Model:
GSI-B506
Condition:
Brand New
Write a review

Mr.Hobby GSI-B506 Surface No.500 for Model Prep

Getting paint to look right starts with good surface prep. The Mr.Hobby GSI-B506 Surface No.500 primer spray evens out small imperfections and prepares plastic and resin components for smooth topcoats.

What It Does for RC Parts

The GSI-B506 formulation helps fill minor scratches and levels uneven areas without hiding detail, making it practical for scale parts, body shells and resin accessories used by RC enthusiasts.

Spray Recommendations

Clean parts thoroughly and shake the can to mix the contents. Spray light, overlapping passes and let each coat dry fully before applying another. If you plan to sand, wait until the primer is completely cured to avoid clogging sandpaper.

Can this product be used under enamel paints?

Yes, once dry the primer accepts many paint systems, including enamels, but always test compatibility on a scrap piece first.

How quickly does it cure fully?

Touch dry times are short, but full cure can take longer depending on conditions; allow adequate time before heavy handling or masking.

Is masking necessary for multi part builds?

Masking is recommended when you need to protect areas like windows or pre-painted details; remove or mask parts before priming for best results.

Copyright © 2008-2025 rcjaz.com.au All rights reserved