Mr.Hobby GSI-C101 Gloss Smoke Gray 10ml Hobby Paint  [GSI-C101]

Mr.Hobby GSI-C101 - Gloss - Smoke Gray - 10ml
Price:
AUD$5.27
Brand:
Mr.Hobby
Model:
GSI-C101
Condition:
Brand New
Write a review

Mr.Hobby GSI-C101 smoke gray gloss finish

This 10ml gloss paint gives a clean smoke gray finish that suits builders focused on crisp, glossy results for static models and figures. The gloss level enhances edges and panel lines when applied carefully.

Where to Use This Paint

Designed for general model-making rather than polycarbonate RC car shells, the GSI-C101 performs well on polystyrene, resin, and painted substrates used in scale modelling projects.

Practical Application Notes

Ensure surfaces are degreased and primed before painting. For best results, apply thin coats and allow adequate flash-off and curing time between layers to maintain an even gloss without runs.

No, it is not formulated for polycarbonate. Use paints specified for polycarbonate when painting RC car shells to avoid adhesion and flexibility issues.
Use a high quality fine brush and thin the paint slightly for brush work, or use an airbrush for the smoothest finish. Apply several thin layers rather than one heavy coat.
Clean tools with a suitable solvent for gloss hobby paints, following safety instructions. Wipe up spills promptly and store the paint with the lid tightened.
Yes, after the paint is fully cured you can apply a compatible clear coat to boost protection and gloss. Test compatibility on a scrap piece first.

Copyright © 2008-2025 rcjaz.com.au All rights reserved