Mr.Hobby GSI-GT03F 5 Pack Filters for GT03 Mr.Super Booth  [GSI-GT03F]

Mr.Hobby GSI-GT03F - Filter for GT03 Mr.Super Booth (5 pcs)
Price:
AUD$11.59
Brand:
Mr.Hobby
Model:
GSI-GT03F
Condition:
Brand New
Write a review
alt="Mr.Hobby GSI-GT03F - Filter for GT03 Mr.Super Booth (5 pcs)" title="Mr.Hobby GSI-GT03F - Filter for GT03 Mr.Super Booth (5 pcs)"

Keep overspray out of the air

Good airflow control prevents dust and stray particles from ruining paintwork on RC bodies. The Mr.Hobby GSI-GT03F filters are intended for use with the GT03 Mr.Super Booth to reduce airborne contaminants during spraying.

Practical use in the workshop

The GSI-GT03F pack supplies five replacement filters so you can maintain the GT03 Mr.Super Booth between projects. Regular filter swaps help preserve finish quality and cut down on rework caused by dust.

Simple maintenance advice

Power the booth down before removing an old filter and press the new GSI-GT03F into place with a firm fit. Checking the filter condition after each heavy session will keep the GT03 Mr.Super Booth working reliably.

How long will one filter last?

Filter life depends on paint type and session length, but expect to replace filters approximately every 10 to 15 hours of active spraying for consistent results.

Are these genuine replacement parts?

These are the correct filter elements for the GT03 Mr.Super Booth. Using the specified GSI-GT03F parts helps ensure fit and function.

Any prep before fitting a new filter?

Turn the booth off, remove the old filter, wipe the housing if dusty, then insert the new GSI-GT03F filter and check the seal before restarting the booth.

Copyright © 2008-2025 rcjaz.com.au All rights reserved