Mr.Hobby GSI-JG11 G Blue - Gundam Spray Can (3) [GSI-JG11]

Mr.Hobby GSI-JG11 - Gundam Color Spray - G Blue (3)

Price:

AUD$7.30

Brand:

Mr.Hobby

Model:

GSI-JG11

Not Available

Write a review

Description
FAQ

Upgrade Your Gundam Colour with Mr.Hobby GSI-JG11

Hobbyists seeking a reliable blue for their Gundam projects will find the Mr.Hobby GSI-JG11 Gundam Color Spray in G Blue (3) useful. The aerosol is tuned to provide an even coat that improves the model's overall look without complex prep.

Benefits of Choosing G Blue

The G Blue (3) hue gives a bold, consistent colour that flatters detailed kits. Its formulation focuses on smooth application and reduced drip risk, making it a practical pick for varied skill levels.

Spray Application Advice

Wipe the model to remove dust and oils before painting.
Vigorously shake the can for at least one minute to mix contents.
Keep the nozzle 15-20 cm from the surface and spray in steady passes.
Apply a few light layers rather than one thick coat to avoid runs and maintain detail.

Can this paint be used on different plastic types?

Yes, it works on common model plastics, though checking on a scrap part first is wise to confirm compatibility and finish.

How many coats are typical for full coverage?

Most builders use 2 to 3 light coats to achieve solid coverage while preserving surface detail and avoiding runs.

Will this spray affect fine panel lines?

If applied in heavy coats it can obscure fine lines, so use light, controlled passes and consider panel lining before final spraying if needed.

Is touch up possible with the same can?

Yes, spot touch ups are possible; shake well and apply short bursts from a similar distance to match the surrounding finish.

How long before I can handle the model after spraying?

Surface drying is usually quick, but allow at least several hours before light handling and up to 24 hours for full cure depending on conditions.

Hot Brands