Mr.Hobby S30 Mr.Color Spray Flat Clear 100ml - Flat Finish Aerosol  [GSI-S30]

Mr.Hobby S30 - Mr.Color Spray Flat Clear 100ml
Price:
AUD$13.46
Brand:
Mr.Hobby
Model:
GSI-S30
Condition:
Brand New
Write a review

Finish Overview for Mr.Hobby S30 Flat Clear

Mr.Hobby S30 - Mr.Color Spray Flat Clear is a lacquer-based spray made to give models a controlled flat finish. The 100ml capacity is handy for bench work and provides a predictable matte topcoat when applied properly.

Where to Use This Spray

Ideal for plastic kits, painted dioramas and figures, this flat clear is not formulated for polycarbonate RC shells that require flexible polycarbonate paints. Treat it as a finishing lacquer for rigid model surfaces.

Spraying Advice for Consistent Results

Make sure surfaces are clean and dry. Shake the can vigorously and apply short bursts in even strokes. Keep coats light and let each layer dry before adding more to prevent runs and orange peel.

Will Mr.Hobby S30 work on painted RC shells?

Not recommended for polycarbonate RC shells. Those parts need polycarbonate-specific paints to maintain flexibility and adhesion.

How long before I can handle a sprayed part?

Drying times vary by temperature and humidity, but wait at least 30 minutes between light coats and 24 hours for full handling in normal workshop conditions.

Can I sharpen the matt level with a second gloss coat?

If you need a different sheen level, test by applying a compatible gloss or satin clear over a sample first. Mixing sheen levels on the finished model can affect the final appearance.

Copyright © 2008-2025 rcjaz.com.au All rights reserved