Mr.Hobby UG16 Titans Blue 1 Semi Gloss 10ml Acrylic for Gundam Models  [GSI-UG16]

Mr.Hobby UG16 - Titans Blue 1 Semi Gloss 10ml (Mr.Color Gundam Color)
Price:
AUD$5.27
Brand:
Mr.Hobby
Model:
GSI-UG16
Condition:
Brand New
Write a review

Semi-Gloss Titans Blue for Kit Finishing

This 10ml Mr.Color entry provides the Titans Blue 1 colour with a controlled semi-gloss surface. Mr.Hobby UG16 Titans Blue 1 Semi Gloss is aimed at builders wanting accurate hues and a tidy, low shine finish on plastic parts.

Perfect Match for Gundam Panels

Use this shade to replicate the Titans Blue found on many Gundam designs. The finish keeps detail readable and avoids glare that can mask small sculpted features.

Application Notes

Apply by brush for selective details or thin for airbrush work. A primer layer improves flow and adhesion, especially on smooth polystyrene kit parts.

Key Features

  • Volume: 10ml
  • Finish: Semi-gloss
  • Color: Titans Blue 1
  • Application: Suitable for Gundam model kits and plastic models

Do I need a separate clear coat after this paint?

If you want additional protection or a different sheen, apply a lacquer clear coat. Test compatibility on a scrap part first.

Can I use masking tape over this paint?

Yes, but wait until the paint is fully cured and remove tape slowly to avoid lifting. A light seal coat can help prevent edges peeling.

Is thinning required for fine detail work?

For airbrushing fine detail, thin the paint to the recommended viscosity. For brush work, use it less thinned and apply thin coats to preserve detail.

Copyright © 2008-2025 rcjaz.com.au All rights reserved