MRX-5 Aftermarket Brake Bracket by Arrowmax AM-MRX5-H2302  [AM-MRX5-H2302]

MRX-5 Brake Bracket Details

The Arrowmax AM-MRX5-H2302 brake bracket is an aftermarket aluminium component made for the Mugen MRX-5 chassis series. It installs as a direct-fit brake linkage mount and is intended to work with the standard MRX-5 brake assembly without chassis alteration.

Putting the bracket in place is a straightforward task for experienced MRX-5 tuners: remove the original bracket, line up the pivot holes and secure using the original screws. Use a properly sized hex driver to avoid damaging screw heads and inspect linkage movement through suspension travel to ensure freedom of operation. This assumes the vehicle uses standard MRX-5 hardware; mixing incompatible fasteners is not advised.

The bracket provides a firm pivot point that allows fine adjustments to lever arm length and mounting position, which in turn affects brake engagement and pedal ratio. Make small changes and log settings while tuning for different tracks or practice sessions. This item is for RC models only and not for actual vehicles.