Mugen MTX-5 19T 7075 Pulley for MTX-5 Performance Tuning - MUGEN AM-MTX-T2202A  [AM-MTX-T2202A]

Arrowmax AM-MTX-T2202A Pulley 19T 7075 Hard
Price:
AUD$19.21
Brand:
Arrowmax
Model:
AM-MTX-T2202A
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

19-tooth pulley tailored for MTX-5 drive systems

The Arrowmax AM-MTX-T2202A is a 19T pulley made from 7075 hard aluminium, intended for RC drivetrains and compatible with MUGEN MTX-5 platforms. It can be used as a direct replacement or as an upgrade where the original pulley shares the same tooth count and mounting configuration, helping to improve tooth contact and drivetrain responsiveness.

Fitting normally involves replacing the existing pulley on the MTX-5 gearbox output or intermediate shafts. Check shaft fit, align the pulley carefully, secure retention screws or pins to the recommended torque, and run the system slowly to ensure no binding. This item focuses on tuning engagement rather than changing core gear ratios.

Compatibility and fitment

Suitable for Mugen MTX-5 spare parts and chassis elements that accept a 19T pulley with the same interface, intended for electric RC cars and smaller scale models.

Is this pulley stronger than stock?

The 7075 alloy offers greater hardness than many stock materials, improving wear resistance and maintaining tooth form under load.

Will I need to change bearings when fitting?

Not usually; check bearing condition and shaft play during the swap and replace bearings only if you observe excessive wear or looseness.

Are special retention methods required?

Use the same retention hardware type as the original. Ensure grub screws or pins are fitted to the correct positions and torque settings to prevent slippage.

Copyright © 2008-2026 rcjaz.com.au All rights reserved