Mugen Seiki MTX-5 Compatible Clutch Bell Steel Upgrade - AM-MTX5-T2706 by MUGEN  [AM-MTX5-T2706]

Aftermarket steel bell for MTX-5 clutch systems

This Arrowmax AM-MTX5-T2706 clutch bell is a steel replacement part marketed for use with the Mugen Seiki MTX-5 RC chassis. It functions as the clutch bell that contains the clutch shoes and transmits torque from the motor pinion into the gearbox input, acting as a maintenance and tuning component rather than a chassis redesign.

Compatibility is noted with the Mugen Seiki MTX-5 platform as part of the product classification, so installers should double check bell outer diameter, clutch shoe fitment, and motor pinion engagement against their current parts before installation. Confirm there is adequate clearance in the bell housing to prevent contact with the spur gear or gearbox housing.

Fitting tips: remove the slipper or clutch assembly according to your chassis procedure, measure and compare this bell to the original, and reassemble using suitable thread lock and correct torque values on the retaining hardware. Test engagement at low throttle and tune slipper or clutch springs incrementally to suit track surface and motor output.

Role of material: the steel construction is chosen to provide more consistent engagement and higher wear resistance than softer bells, helping maintain predictable clutch bite and control heat in extended runs. Regularly inspect for scoring or deformation and replace when wear compromises performance.