Outlaw Rampage Compatible 1.9" Chrome Wheel - Kyosho OLH001SMB  [KY-OLH001SMB]

Kyosho OLH001SMB - 1.9 Inch Wheel (Chrome)
Price:
AUD$0.00
Brand:
Kyosho
Model:
KY-OLH001SMB
GTIN:
4548565522323
Please kindly input your name and email address, we will inform you once we have the restocking.
Write a review

Outlaw Rampage 1.9" chrome-plated wheel

The Kyosho OLH001SMB 1.9 inch wheel is an aftermarket chrome-plated replacement and styling component intended for the Outlaw Rampage truck family. It is suitable for enthusiasts seeking a restored or upgraded exterior finish on their scale trucks.

Use is concentrated on Outlaw Rampage series vehicles as referenced in the part name; the wheel fits the common 1.9-inch tyre format found on many scale truck kits. Confirm wheel hex and hub alignment with your chassis prior to installation, since mounting interfaces are not always identical across models.

Standard installation steps apply: remove the tyre if required, mount and seat the tyre, align the wheel, and secure it with your chassis' wheel nut or locking system. After installation, check for adequate tyre clearance through the full suspension travel and confirm there is no binding or rubbing in steering range.

For setup considerations, pairing tyre choice and wheel balance matters: chrome surfaces can make minor tyre seating faults more visible, so take time to glue and seat tyres correctly and check balance to reduce vibration and handling inconsistencies. Consider the part as both a cosmetic upgrade and a usable spare for maintenance.

Choose the Kyosho OLH001SMB chrome 1.9" wheel to refresh or personalise Outlaw Rampage trucks while following standard RC installation checks.
Remark :
Due to limited stock availability, please notice that some Kyosho items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Is the OLH001SMB easy to fit on standard hubs?

Yes, it installs like most 1.9-inch wheels, but you must confirm your hub bore and hex size match the wheel to ensure correct seating and retention.

What should I check after fitting the wheel?

Verify suspension travel clearance, steering throw, and wheel runout. Re-check wheel nuts after initial runs to prevent loosening.

Will the chrome finish chip under off-road use?

Chrome plating can be susceptible to chips if struck by debris; inspect the finish regularly and replace the wheel if plating damage compromises tyre seating.

Any advice for balancing these wheels?

Balance the tyre and wheel assembly after mounting. Small weights or careful tyre trimming and glue distribution can reduce vibration caused by imperfections highlighted by the chrome surface.

Copyright © 2008-2026 rcjaz.com.au All rights reserved