Outlaw Rampage PRO 2.0 Front Suspension Arm V2 Upgrade for Tuning - Kyosho OL046  [KY-OL046]

Kyosho OL046 - Front Suspension Arm V2
Price:
AUD$0.00
Brand:
Kyosho
Model:
KY-OL046
GTIN:
4548565522279
Please kindly input your name and email address, we will inform you once we have the restocking.
Write a review

V2 Front Suspension Arm — Tuning Focus

The Kyosho OL046 front suspension arm V2 is an aftermarket replacement for the Outlaw Rampage PRO 2.0 chassis designed to bring worn lower arms back to spec. It provides consistent mounting geometry that supports repeatable steering adjustments.

The component positions the wheel hub and controls camber and toe under load, making it a key element in how the truck reacts to setup changes. The V2 mark signals a revision that aims to match factory fitment and geometry so chassis modification is not required.

Installation notes: remove the front wheel and lower-arm mounting hardware, move any reusable bushings or pins from the original arm if applicable, fit the OL046 in the correct orientation, and torque fasteners to the manufacturer's recommended figures. After installation, re-evaluate ride height, camber, and toe to confirm expected handling.

Tuning role: fitting a single arm can reduce steering asymmetry, while matched pairs ensure consistent response when adjusting camber, toe or roll centre for cornering performance.

Compatible Models

  • Outlaw Rampage PRO 2.0
Remark :
Due to limited stock availability, please notice that some Kyosho items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

How does replacing the arm affect tuning precision?

A correctly fitted OL046 restores intended pivot points, which helps settings like camber and toe remain consistent run to run, improving tuning predictability.

Should I adjust camber after installation?

Yes. Once the arm is fitted, verify camber and toe and make any small corrections so the handling matches your previous setup or desired balance.

Does the V2 change suspension travel or feel?

The V2 targets accurate fitment rather than altering travel. If installed correctly, suspension travel should mirror the original arm's behaviour while improving consistency.

Any setup checks specific to tuning sessions?

After installing, perform a baseline setup: confirm wheel alignment, measure camber and toe, and run short laps to validate steering response before refining tune changes.

Copyright © 2008-2026 rcjaz.com.au All rights reserved