Performance F/R Shock Towers with Spacer for YZ-4 - Yokomo Z4-017  [Z4-017]

Yokomo Z4-017 F/R Shock Tower/Spacer for YZ-4
Price:
AUD$10.55
Brand:
Yokomo
Model:
Z4-017
GTIN:
3888
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
Spares / Hop-ups - Yokomo - YZ-4 category
Write a review

YZ-4 suspension tower pack

The Yokomo Z4-017 package contains both front and rear shock towers plus a spacer, designed for installation on the YZ-4 4WD off-road chassis. Components are resin molded and supplied as a coordinated set with an extra spacer for rear shock positioning.

These towers provide the mounting interface for shocks and offer a simple method to alter suspension geometry; moving tower locations or introducing the spacer changes mounting height and clearance, which influences shock angle and travel. Resin keeps the pieces light while ensuring accurate mounting faces for correct chassis alignment.

Practical notes: inspect the YZ-4 shock mounting points prior to fitment. Use the spacer only when it is necessary to gain rear clearance, and retorque mounting screws after early testing to prevent slippage at the mount interfaces.

Compatibility

  • Supported chassis: B-YZ4
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

How will changing tower position affect handling?

Altering tower position or using the spacer shifts shock angle and neutral ride height, which can change weight transfer and how the car responds in turns; small adjustments tune balance and compliance.

Does the spacer alter suspension travel?

Yes. Adding the spacer modifies mounting clearance and angle, which can increase or decrease effective travel depending on the new geometry.

What checks should I perform after installation?

After fitting, verify all clearances, confirm that shocks operate through their range without binding, and recheck fastener torque after a short run to ensure stable mounting.

Copyright © 2008-2026 rcjaz.com.au All rights reserved