Real Grade Evangelion 1/144 Decal Sheet 5062932 Bandai - RG Detailing  [B-5062932]

Bandai 5062932 - RG Evangelion Decal 1
Price:
AUD$17.32
Brand:
Bandai
Model:
B-5062932
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Aftermarket decal sheet for Bandai RG Evangelion 1/144 kits

This decal sheet is supplied for RG 1/144 Evangelion model kits as an aftermarket option to add extra surface detail to Real Grade builds.

What the decals do

The sheet contains printed insignia and fine markings intended for exterior armor panels and around joints. They are made to enhance the RG Evangelion appearance and increase visible surface detail after construction and finishing.

Tips for application

Apply decals with careful placement on painted or raw plastic surfaces. Clean the area first and, where useful, apply a gloss or semi-gloss base coat to help reduce silvering. Small picks, tweezers, and steady hands will assist alignment on narrow panels and limb sections.

Display and finishing benefits

Sealed under an appropriate clear coat, the decals boost perceived scale detail and reproduce small insignia that are difficult to brush. Correct sealing minimizes edge lift and improves adhesion for long-term display.

Scope of compatibility

Designed specifically for RG Evangelion Real Grade 1/144 kits; using the sheet on other scales or lines may call for trimming or relocating decals to suit part shapes.

Specifications

  • Compatibility: RG 1/144 Evangelion Real Grade model kits
  • Function: Printed surface markings for armor and joint-area detail
  • Builder note: Recommended placement over gloss-prepared surfaces for best adhesion and alignment

The decal sheet adds refined surface detail to RG Evangelion kits, requires careful placement and sealing, and elevates finished presentation when combined with good surface prep and topcoat work.

A gloss or semi-gloss base coat is recommended to reduce silvering and help the decal film sit smoothly on the surface before sealing.
Textured surfaces make neat application more difficult. For best results, apply to smooth, gloss-prepared areas or carefully sand and level textured panels first.
Use fine-tipped tweezers and magnification if needed. Position slowly and press gently from the center outward to avoid trapping air under the decal.
Yes. Do not place decals across joint interfaces or moving contact points to prevent tearing or restricted movement.
Trimming may be necessary for tight curves or very small panels. Carefully cut away excess film and tuck edges before sealing for a flush finish.
Yes. After decals are fully set, a satin clear coat will protect the markings while giving a subdued sheen appropriate for many display finishes.

Copyright © 2008-2026 rcjaz.com.au All rights reserved