Rear Lower Link Mounts for Axial Yeti XL, Aluminum - YTL-25006 by Jazrider  [YTL-25006]

This aluminum rear lower chassis suspension link mount set is made for the Axial Yeti XL chassis as an aftermarket replacement for the stock lower link mounts. It stiffens the rear link anchor area to provide a more stable mounting location for suspension links while adhering to scale upgrade norms.

Confirmed fitment is for Axial Yeti XL models only, per the product name. The material is aluminum, so installers should expect to swap out the factory plastic or OEM mounts and use the original mounting holes and hardware supplied on the Yeti XL.

Installation overview: remove the rear lower link mounts from the Yeti XL rear rails, carry over any factory pins or screws if needed, then secure the new aluminum mount pieces in the same positions. Standard hex drivers matching the factory screw heads are typically used.

Tuning notes: with reduced mount flex you will see steadier rear link geometry under load, which can aid setup consistency. Verify alignment and articulation after installation and retighten fasteners as required.