Rear Upper Suspension Arm Aluminum Upgrade for TAMIYA TL-01/GF-01/WR-02 - TL01-13301-RD by Jazrider  [TL01-13301-RD]

Tamiya TL-01/GF-01/WR-02 Aluminum Rear Upper Suspension Arm (Red)
Price:
AUD$7.31
Brand:
JAZRIDER
Model:
TL01-13301-RD
Condition:
Brand New
Available in shop
Write a review

Tuning impact on rear traction and response

This red anodized aluminum rear upper suspension arm is offered as a tuning upgrade for TAMIYA TL-01, GF-01 and WR-02 models and is intended to be fitted in place of the stock plastic arm. It is supplied to match original mounting points and does not require chassis alterations.

By stiffening the upper arm, the alloy reduces flex and produces a more immediate axle reaction during acceleration and cornering. Drivers should evaluate changes to rear-end balance and make measured setup adjustments after installation.

Tuning suggestions: expect a crisper rear feel and check toe, camber and damper settings; small increments to spring or rebound rates can help restore the handling balance you prefer. This product is for RC-scale use only and is not intended for any real vehicle application.

How will this arm change rear-end handling?

The stiffer arm reduces flex around the upper mount, producing a quicker axle reaction and a tendency toward a tighter rear. Fine-tune toe and damper settings after fitment.

Should I alter spring or rebound rates after fitting?

Small incremental changes to spring stiffness or rebound damping are recommended if the car feels too tight or loses rear traction; adjust gradually and test between runs.

Will this work with existing shock and tower settings?

Yes. The arm is designed for stock geometry, but recheck shock mounting positions and preload as the altered arm stiffness can change shock loads.

Copyright © 2008-2026 rcjaz.com.au All rights reserved