Receiver On/Off Harness for T-Deans to RX ESW-1D Futaba FUEBA0324  [FUEBA0324]

On/off harness for receiver power

The Futaba FUEBA0324 ESW-1D is an on/off electric switch harness intended for RC electric models using T-Deans style battery plugs and direct receiver power connections. It provides a compact switched route from the battery pack to the receiver power lead so set ups stay tidy and accessible.

Compatibility and wiring: the harness couples a T-Deans male/female battery plug to the receiver (RX) input and places the on/off switch inline with the positive conductor. It is meant for typical RC electric systems and should only be used where receivers or inline electronics accept direct battery switching by this harness type.

Installation guidance: route the harness clear of suspension movement, pinion and spur gear areas, and motor exhaust or cooling vents. Secure the switch firmly to the chassis with cable ties or a small adhesive pad to stop the lever from catching. Double-check polarity when connecting to prevent reversed connections.

Practical use: this harness is a handy tool for bench setup and field operation, allowing rapid power cycling of the receiver and connected accessories without removing the battery. It helps with pre-run checks and transport safety but does not replace proper battery handling or an ESC cutoff where required.