Replacement Cylinder Head 74035-01 (KE21V) Kyosho  [KY-74035-01]

Kyosho 74035-01 - Cylinder Head(KE21V)
Price:
AUD$96.19
Brand:
Kyosho
Model:
KY-74035-01
GTIN:
4548565513857
Condition:
Brand New
Write a review

KE21V Cylinder Head Essentials

This cylinder head is a dedicated spare for the KE21V series of RC engines, intended as a direct replacement unit. It performs the essential tasks of sealing the combustion chamber and housing the head gasket and glow plug assembly on nitro model engines.

Fit and compatibility: the part is specified for KE21V engines; visually inspect mounting holes and glow plug clearance against the original head prior to installation. Do not attempt to force parts that do not align.

Installation notes: ensure mating surfaces are clean, use the correct head gasket thickness supplied with your engine, and tighten head screws evenly in a crisscross pattern to prevent distortion. Verify glow plug seating and thread engagement during reassembly. Avoid excessive torque.

Tuning role: although the head does not change the engine's internal dimensions, its condition and sealing ability affect compression consistency and heat management. Replace warped or compromised heads to regain dependable running and tuning behavior.
Remark :
Due to limited stock availability, please notice that some Kyosho items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Will this head restore lost compression on a KE21V?

If compression loss is caused by a warped or damaged head, fitting a correct replacement can restore a proper seal and improve compression. Confirm the head is the root cause before replacing.

Can I reuse my old gasket with this head?

It is best to use the correct gasket thickness specified for your engine. Reusing a worn or incorrect gasket can compromise sealing and performance.

Does the head change engine tuning characteristics?

The head itself does not alter displacement, but poor sealing or damaged faces will affect compression and thus tuning. A properly fitted head supports stable tuning results.

Any recommended reassembly sequence?

Clean all surfaces, fit the correct gasket, and tighten head screws gradually in the crisscross pattern to the specified feel. Avoid overtightening to protect threads.

Copyright © 2008-2026 rcjaz.com.au All rights reserved